45 Fourth Street, Somerville, New Jersey 08876
Call Us

SaltDogg Spreaders

SaltDogg®: Leader of the Pack

Spreaders from 100 lb. up to 16 yd. capacity. From manual walk-behind spreaders, to electric drive, gas powered or hydraulic drive spreaders, SaltDogg has what you need.


SaltDogg Walk Behind Spreaders

Professional grade walk-behind spreaders feature a large 1.5 cu.ft. poly hopper; and are available with carbon steel or stainless steel framework.

SaltDogg Walk Behind Spreaders

WB100 & WB200

WB100 & WB200

WB400

WB400

SaltDogg Tailgate Spreaders

The most cost-effective high quality tailgate spreaders in the industry.

SaltDogg Tailgate Spreaders


TGSUVPROA

TGSUVPROA This spreader is ideal for residential/light commercial applications.It features an attractive and rugged black polymer hopper and orange powder coated steel mounting frame. Equipped with a fold-away feature—simply release hitch pin & spreader folds away for easy access to rear door or tailgate.


TGS03

TGS03The TGS03 combines the robustness of an auger-driven V-Box spreader with the simplicity and easy mounting of a tailgate spreader. The open-auger design gives contractors the option to spread a variety of materials, typically limited to V-Box spreaders.

TGS07

TGS07The TGS07 combines the robustness of an auger-driven V-Box spreader with the simplicity and easy mounting of a tailgate spreader. The open-auger design gives contractors the option to spread a variety of materials, typically limited to V-Box spreaders.

Dual action lid provides convenient loading from the ground or pick-up bed.


SaltDogg Electric Drive Hopper Spreaders

The SaltDogg electric-drive spreaders are powered by 12-volt direct drive gear motors, and are available from 3/4 yard to 6 yard capacity.

Which Electric Drive Hopper Spreader Will Work For You? Available in Poly or Stainless Steel.

SaltDogg Electric Drive Hopper Spreaders

From Residential/Light Commercial to Medium & Heavy-Duty Commercial

The SHPE series SaltDogg® spreaders are completely self-contained, ultra–durable spreader units designed for ice and snow control. The rugged design allows for use with salt or salt/sand mix. The complete assembly mounts easily on utility vehicles, pickups, dump, platform and utility trucks, making it ideal for municipalities, shopping malls, industries, hospitals and private contractors.


SHPE1500

SHPE1500

Capacity – SHPE1500 Series: 1.5 cu.yrds (7'8")

SHPE2000

SHPE2000

Capacity – SHPE2000 Series: 2 cu.yrds (8')


Material Hopper - Rotationally molded double-wall polymer unibody spreader with smooth angled walls to maximize material flow. Features integrated positive position mount system plus 4-piece ratchet tie-down kit. No drilling required. (Molded fork slots in hoppers makes for easy one man installation & removal, requires extended fork, or lift from 4-point tie downs.)

Auger – 2.5" dia. screw-type auger system travels the length of the hopper floor, providing maximum material flow at a continuous rate. An independent spinner/auger controller allows for both independent spinner speed and an infinitely adjustable ratio between spinner and auger.

Material Flow/Output – Salt, 2.2 cu. ft./minute; Salt/Sand, 1.3 cu. ft./minute. Spread width is variable from 5 to 30 feet.

Spinner Chute Assembly – A 12" polymer disc is connected to a 3/4" diameter stainless steel shaft. The spreading material is guided from the stainless steel trough to the spinner plate through an enclosed heavy-duty polymer chute and spinner assembly with an external deflector. The extra-wide adjustable deflector protects the vehicle and allows for complete directional spread control. A convenient spring-latch locking mechanism allows the spinner assembly to be removed for cleaning/storage. Extended chutes are available.

Electric Motors – Two ultra-quiet 12-volt DC direct-drive motors power the auger and spinner, and are encased in a heavy-duty poly housing along with vibrator. The wiring harness is constructed of 10-gauge automotive wire. An in-cab console features independent controls for the auger, spinner and vibrator.

Standard Equipment – 1/4" black powder coated steel top screen. Heavy-duty poly-vinyl tarp with reinforced corners and tie-down kit. Heavy-duty 12 VDC vibrator, rated at 200 force pounds for maximum performance. Spreader hold-down kit.


3014199 – Variable Speed Controller (standard w/SHPE0750, SHPE1500, SHPE2000 and SHPE4000)

3014199


SHPE4000

SHPE4000

Capacity – 4.0 cu.yrds (8'4")

SHPE6000

SHPE6000

Capacity – 6.0 cu.yrds (10'7")


Auger – 5.5" (6" on SHPE6000) large diameter auger system travels the length of the hopper floor, providing maximum material flow at a continuous rate. An independent spinner/auger controller allows for both independent spinner speed and an infinitely adjustable ratio between spinner and auger.

Material Flow/Output – Salt, 3.2 cu.ft./minute; Salt/Sand, 2.3 cu.ft./minute. Spread width is variable from 5 to 30 feet.

Spinner Chutge Assembly – A 14" polymer disc is connewcted to a ¾" diameter stainless steel shaft. The spreading material is guided from the staainless steel trough to the spimmer plate through an enclosed heavy duty polymer chute and spinner assembly with an external shield. A convenient spring-latch locking mechanism allows the spinner assembly to be removed for cleaning/storage.

Electric Motors – Two ultra quiet 12-volt DC direct-drive motors power the auger and spinner, (SHPE4000 - .5HP Auger Motor, .4 HP Spinner Motor, SHPE6000 - .75 HP Auger Motor, .5 HP Spinner Motor), and are encased in a heavy-duty poly housing along with independently powered vibrator(s). The wiring harness is constructed of 10-gauge automotive wire. An in-cab console features independent controls for the auger, spinner amd vibrator.

Standard Equipment – Two ¼" black powder coated steel top screeens. Stainless steel inverted V. Heavy-duty poly-vinyl tarp with reinforced corners and tie-down kit. Spreader hold-down kit. Two Heavy-duty 12 VDC vibrators, rated at 400 of force pounds each for maximum performance (SHPE4000 only) Heavy-duty 12 VDC vibrator, rated at 900 of force pounds for maximum performance (SHPE6000 only).


3014199 – Variable Speed Controller (standard w/SHPE0750, SHPE1500, SHPE2000 and SHPE4000)

3014199


3046934 - Variable Speed Controller (standard w/SHPE2250, SHPE3000 & SHPE6000)

3046934